Falsework Guide 1988
This revised edition of the guide includes guidelines for the temporary propping of precast concrete floor systems, tilt-up wall panels and concrete block walls.
The failure of temporary supports for these structures continues to give cause for much concern. It is essential for the structures to be adequately propped and braced if serious accidents are to be avoided.
Table of Contents
Introduction
1. Definitions, Scope and General Requirements
1.1 Definitions
1.2 Scope
1.3 General Requirements
2. Recommended Safe Construction Practices
2.1 General
2.2 Materials
2.3 Erection
2.4 Loading and Dismantling
2.5 Care and Maintenance
2.6 Safety
3. Guidelines for Temporary Support
3.1 Concrete Block Walls
3.2 Tilt-up Precast Concrete Wall Panels
3.3 Precast Concrete Flooring
4. Safety Check-list
4.1 Purpose
4.2 General Construction
4.3 Foundations
4.4 Vertical Supports
4.5 Horizontal Bearers
4.6 Bracing
Appendix A: Some Causes of Accidents & Falsework Failures
Appendix B: Summary of Act and Regulations
Glossary of Terms
